
Lutz Cabinet Refacing
Cabinet Refacing in Lutz, FL
Cabinet refacing in Lutz, FL. New doors, veneer, and hardware over your existing boxes. Free written estimates, call [(656) 206-2751](tel:+16562062751).
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lutz and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Cabinet Refacing
Custom cabinet makers Lutz FL: Cabinet Refacing for homes and businesses in Lutz
Lutz runs from older rural homesteads with solid-wood cabinet boxes to newer upscale subdivisions off US-41 with builder-grade boxes that look tired faster than they should. Both get the same answer: the boxes are usually fine, the doors and finish aren't. Lutz Cabinet Refacing handles that distinction every day, swapping doors, drawer fronts, and veneer skins instead of gutting a working kitchen.
Tampa Bay humidity is hard on thermofoil and laminate finishes. Peeling and bubbling on older builder-grade doors is a common call here, and it's one reason material choice matters more in Lutz than it does further inland. Lutz Cabinet Refacing prices this work with a written estimate from an in-home measure, not a phone guess. Call (656) 206-2751 or visit Contact to get on the schedule. See About for how estimates work.

What we do
Cabinet Refacing services
Cabinet Refacing across Lutz and the surrounding area.
Residential Services

Cabinet Refacing
Cabinet refacing in Lutz, FL. New doors, veneer, and hardware on your existing boxes, free written estimates.
Learn more →
Kitchen Cabinet Refacing
Kitchen cabinet refacing near Lutz, FL covering full kitchens, all boxes, doors, and hardware, free estimates.
Learn more →
Bathroom Vanity Refacing
Bathroom vanity refacing in Lutz, FL fixes swollen or dated vanities with moisture-resistant doors and veneer. Free estimates, honest pricing.
Learn more →
Cabinet Door Replacement
Cabinet door replacement in Lutz, FL. New doors and drawer fronts matched to your boxes, free estimates.
Learn more →
Cabinet Refinishing & Painting
Cabinet refinishing and painting in Lutz, FL for solid wood boxes that just need a fresh coat. Durable finishes, free estimates.
Learn more →
Custom Cabinet Doors
Custom cabinet doors in Lutz, FL for non-standard sizes and higher-end finishes. Built to match your boxes, free estimates.
Learn more →
Kitchen Island Refacing
Kitchen island refacing in Lutz, FL matches your island to refaced perimeter cabinets on every visible side. Free estimates.
Learn more →
Thermofoil & Laminate Peeling Repair
Thermofoil and laminate peeling repair in Lutz, FL fixes humidity-driven bubbling on builder-grade cabinets. Free estimates, honest fixes.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Lutz Cabinet Refacing
Written estimates, not phone guesses
A specialist measures your kitchen in person and puts a real number on paper before work starts.
Box assessment before quoting
We check hinges, corners, and moisture damage on existing boxes before pricing anything.
Finishes matched to Florida humidity
Door and veneer picks account for AC cycling and year-round moisture, not just a catalog swatch.
One crew start to finish
The team that measures your kitchen is the team that installs it.
Have a project in mind?
Get a Free EstimateHow it works
How our Cabinet Refacing process works
Step 1Initial Consultation
A specialist visits to assess existing cabinetry and discuss style goals.
Step 2Measurement & Design
Precise measurements are taken to plan door sizes, finishes, and layout adjustments.
Step 3Material Selection
Homeowners choose from veneers, finishes, and hardware samples for their project.
Step 4Surface Preparation
Existing boxes are cleaned, sanded, and repaired to ensure a smooth refacing surface.
Step 5Refacing Installation
New veneers, doors, and panels are applied and fitted to the existing cabinet frames.
Step 6Final Walkthrough
A final inspection confirms alignment, finish quality, and functioning hardware before closeout.
Ready to start?
Get a Free EstimateCost
Cabinet Refacing Lutz FL cost: what to expect
Cost swings on three things: door material, box condition, and how many doors you're covering. None of that gets guessed, it gets measured and quoted in writing. Call (656) 206-2751 for a free estimate specific to your kitchen.
| Project type | Typical range | What’s included |
|---|---|---|
| Door-only updates | $2,500–$6,000 | new doors and drawer fronts on sound existing boxes. |
| Standard kitchen refacing | $6,000–$12,000 | full box veneer plus new doors and hardware. |
| High-end custom refacing | $12,000–$20,000+ | custom door profiles, upgraded hardware, and crown molding. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and methods we use for Florida humidity
Door and veneer choice matters more here than in a dry climate, so these are the products that hold up.

Wood Veneer Sheets
Thin wood veneers are applied over existing boxes for a refreshed natural look.

Laminate Finishes
Durable laminate options give an easy-to-clean surface at a lower cost than solid wood, good for busy households.

Solid Wood Doors
Solid wood handles Florida's humidity swings better than particleboard, and it refinishes well down the road.

Cabinet Hardware
Knobs, pulls, and hinges are selected to match the updated cabinet style.

Soft-Close Hinges
Upgraded hinges provide quiet, smooth closing for all cabinet doors.

Protective Topcoat
A clear sealant layer protects finished surfaces from moisture and daily wear.
Questions on materials?
Get a Free EstimateTimeline
How long does cabinet refacing take?
Most kitchens go from first call to finished install in two to three weeks total, though actual work days are far fewer than that.
- 01
Consult and measure
same day - 02
Door and material order
1–2 weeks - 03
Box prep
1 day - 04
Install
2–4 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, codes, and compliance in Hillsborough and Pasco
Lutz sits across two counties, and the permit answer depends on which side of the line you're on. Both agree on cosmetic refacing, though. Always verify specifics with Hillsborough County or Pasco County building services before starting, since your exact scope may differ.
| Typically needs a permit | Often no permit |
|---|---|
| Plumbing relocation during a kitchen project | Cabinet door and drawer front replacement |
| Electrical rewiring or new circuits | Veneer application over existing boxes |
| Structural wall changes or layout moves | Hardware swaps and soft-close upgrades |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a Cabinet Refacing pro
| DIY | Hire a pro |
|---|---|
| Fine for swapping a single door or drawer front | Multi-door alignment across a full kitchen gets difficult fast |
| Reasonable for basic hardware or hinge changes | Veneer adhesion fails in humidity without the right bonding method |
| Workable for small touch-up paint jobs on solid wood | Box repair before refacing needs an accurate read on moisture damage |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing
Call (656) 206-2751 when you spot any of these.
- Thermofoil or laminate doors are peeling or bubbling
- Doors won't close right, or they sag on the hinge
- Finish looks outdated and you're planning to sell
- Box surfaces feel swollen near a sink or dishwasher
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Lutz and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Lake Magdalene · Cheval · Land O' Lakes · Northdale · Pebble Creek · Carrollwood · Odessa · Tampa · Citrus Park · Keystone · and others
Outside these locations?
Before & after
See the work up close

Before 
After
Customer feedback
What local customers say

Brandon F.
3 weeks ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the cabinet refacing turned out better than I pictured.
Lutz, FL

Melissa F.
5 days ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for soft-close hardware upgrades. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Long Lake Ranch border, FL
Elizabeth T.
1 week ago
5 out of 5 starsCalled Lutz Cabinet Refacing after a neighbor tip in Lutz. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our custom color matching.
Lake Keen, FL
Common questions
Cabinet Refacing FAQs
What are the steps involved in cabinet refacing?
A specialist measures your boxes, you pick doors and finish, the boxes get cleaned and prepped, then new veneer and doors go on. A walkthrough closes out the job.
What is the most expensive part of redoing a kitchen?
In a full remodel, new cabinet boxes and labor eat most of the budget. In a refacing job, door material grade and door count drive the number instead, which is why refacing runs well under a gut remodel.
What kitchen cabinet colors will look outdated in 2026?
Heavy orange-toned oak stains and glossy builder-white are both aging out. Warm whites, soft greens, and matte finishes are holding up better long term.
How much does it cost to refinish kitchen cabinet doors?
Refinishing existing solid wood doors runs cheaper than replacing them, usually in the low thousands for a full kitchen depending on door count and coat quality.
How much does Cabinet Refacing cost in Lutz?
Most Lutz kitchens land somewhere between budget door swaps and full custom refacing, depending on door material, box condition, and kitchen size. Call for an exact written number.
How long does Cabinet Refacing take?
A standard kitchen runs about a week from box prep to final install, not counting the lead time to order doors.
Do I need a permit for Cabinet Refacing?
Usually not. Cosmetic door and veneer swaps skip permitting in both the Hillsborough and Pasco portions of Lutz unless plumbing, electrical, or structural work is involved.
Is DIY Cabinet Refacing a good idea?
For a single door or drawer front, sure. For a whole kitchen, humidity-rated adhesive and door alignment get tricky fast, and that's where most DIY jobs go sideways.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Lutz.
